[79FT]: Building Things
|On:||Aug 21, 2014|
|Tags:||CAD, lower wings|
Past few CAD sessions were drag wires and compression struts...
Typical wire blocks look like this:
Drag / Anti-Drag Wire Block
One interesting thing is that those interfere with aileron's leading edge in the aileron bay if left as is...
Block interference in the aileron bay
Again, asked guys on the Forum. Looks like just relieving them should work.
It's also clear that they interfere with the control system. Well, Ill have to adjust that when I finish the wires' models.
Meanwhile, added all the compression struts and working on the drag / anti-drag wire alignment and layout (they have to cross in the middle of wing bays, so I have to figure out what goes on top and what goes on the bottom). HFW did a good starting layout in his addendum to Plans, so going off of that for now.
Not much more to tell, so Ill just post two more pictures :).
Drag / Anti-Drag Wires hardware
Drag / Anti-Drag Wires in the first wing bay. Second bay is being modeled
"It's too late for Louisville. we're going back to O'Hare."
© Copyright "79FT". All rights reserved. Feel free to cite, but link back to the pages cited.
This website only shows how I did things in my various projects. These pages are for information and personal entertainment only and not to be construed as the only way, or even the perceived correct way of doing things. You are responsible for your own safety and techniques.